In-line Puck Chlorinator leaking at dial

[tstex]

Hello to All,

I use the puck feeder only to add CYA as needed and a break from periodically pour CL.

I called CMP technical support but they didn’t even know their product. The dial that determines the flow rate (CW fully open, CCW, Closed) is dripping when it’s moved CW to dispense. If i shut it, CCW, dripping stops.

Inside the Dial Assembly, there’s an inner part and an o-ring, I’ve enclosed the link to my product and part # 11 is what i need.

I’ve enclosed 4 picks & link
1- overall pick of puck feeder w dial circled
2-dial area w arrow to leak
3-my dial online w no front tab to remove screw
4-dial w tab to remove screw to take off dial

My question is, how do I remove the dial so i can access o-ring to size up and replace?

Thank you very much
tstex

 

[tstex]

Here’s the other 2 pics..due to size, having to split btw 2 diff posts/ thank you

 

[JamesW]

I thought you were getting a SWG?

pulling trigger on t15cell, goodbye hauling CL jugs !

Hello to all, Here's my materials list w a few questions: Note: SWG & flow switch will both be well under 15' to install in to ProLogic PL-8 controller SWG - SwimPure Plus Salt System - Replacement Cell up to 40,000 Gallon – (T-CELL-15-SWP) 2 2" Unions - do the Unions come w the collars that...

www.troublefreepool.com

 

[tstex]

I thought you were getting a SWG?

pulling trigger on t15cell, goodbye hauling CL jugs !

Hello to all, Here's my materials list w a few questions: Note: SWG & flow switch will both be well under 15' to install in to ProLogic PL-8 controller SWG - SwimPure Plus Salt System - Replacement Cell up to 40,000 Gallon – (T-CELL-15-SWP) 2 2" Unions - do the Unions come w the collars that...

www.troublefreepool.com

Thanks James - I was but bc I am going to have to redo the equipment pad now and need shoulder surgery,, I wanted to wait until the temps are cooler and I'm fully ab le to do so...so for now, I want to plug this leak...thank you

AND PS James - you have a very good memory !! ;-)

 

[tstex]

I was just informed that the dial/o-ring is not removable by manufacturer so I would have to replace the whole thing...what kind of xxxp is that? Might have to speed up the SWG sooner than I thought....

 

[duraleigh]

Would it make sense to remove it entirely until you get SWG? Might find a used one here on the forum.......many have been removed.

 

[1poolman1]

Thanks James - I was but bc I am going to have to redo the equipment pad now and need shoulder surgery,, I wanted to wait until the temps are cooler and I'm fully ab le to do so...so for now, I want to plug this leak...thank you

AND PS James - you have a very good memory !! ;-)

Turn it off. Put tablets in floating chlorinator. No leak, chlorine and CYA added. $10.00