Imagine Illusion 40 Complete 10/19/21

🙋‍♂️

*absolutely LOVES when they flip them bad boys 180 degrees in the air like it ain’t no thang. Casey make sure to do your best baby Yoda when they do

D6492581-AD3B-4EF2-A5EE-F088B49F73E9.gif
 
  • Haha
Reactions: K-Row
Had to lift it 3 times to level it. I have permission to fill to the bottom step n that is it. They will be back on Monday. It looks beautiful! I love it so much. My builder said in the fiberglass pool world, Imagine Pools are the Lamborghinis! He said this pool is one of the best made out there. Last pic from my front porch.
 

Attachments

  • 20211007_172012.jpg
    20211007_172012.jpg
    321.2 KB · Views: 118
  • 20211007_172257.jpg
    20211007_172257.jpg
    199.8 KB · Views: 109
  • 20211007_172303.jpg
    20211007_172303.jpg
    368.7 KB · Views: 107
  • 20211007_172852.jpg
    20211007_172852.jpg
    464.8 KB · Views: 108
  • 20211007_173038.jpg
    20211007_173038.jpg
    544.4 KB · Views: 108
  • 20211007_173053.jpg
    20211007_173053.jpg
    538.5 KB · Views: 115
  • 20211007_173211.jpg
    20211007_173211.jpg
    481.1 KB · Views: 121
Nice.....but dam that water is gonna be cold! I had 84 water today and 90 outside. Gonna be 93 by Sunday.
I'm going to run the filter until I get the pool clean. I may fire the heater up if it's still warm out just to make sure it's working. I doubt we'll swim but I just may jump in it. :mrgreen:
 
Happy Jonah Hill GIF


OMG! I'm so happy for you Casey!!!! So exciting to watch them move and set it!

--Jeff
 
  • Love
Reactions: Casey

Enjoying this content?

Support TFP with a donation.

Give Support
Happy Jonah Hill GIF


OMG! I'm so happy for you Casey!!!! So exciting to watch them move and set it!

--Jeff
Its been a long process and I'm so grateful to the guy who brought it here because he didnt have to do that! He had a rough ride on the back roads of West Virginia to stay off the Toll roads.
 
Congratulations Casey, your patience is paying off big time. :party:
No other way to be when you buy a pool during a pandemic. There were days I wished it were here because I was so hot n miserable. I'm glad its here though. I wanna get my chemicals right, clean her up, get the equipment and slide in and get her put to sleep for the winter. I'm going to have an awesome summer next year!👙🤍
 
I shut the water off so it didn't over fill. I checked the deep end walls n no bowing. I'll turn the water on tomorrow and add some CYA to a sock n a little liquid chlorine. Give her a brush through. I'll just tell the guy not to add any CYA. I dont want algae.
 

Attachments

  • 20211007_190647.jpg
    20211007_190647.jpg
    204.5 KB · Views: 69
  • 20211007_190915.jpg
    20211007_190915.jpg
    222.7 KB · Views: 68
  • 20211007_191010.jpg
    20211007_191010.jpg
    218.1 KB · Views: 67
  • 20211007_191013.jpg
    20211007_191013.jpg
    238.3 KB · Views: 68
Had to lift it 3 times to level it. I have permission to fill to the bottom step n that is it. They will be back on Monday. It looks beautiful! I love it so much. My builder said in the fiberglass pool world, Imagine Pools are the Lamborghinis! He said this pool is one of the best made out there. Last pic from my front porch.
Turns out Leisure pools manufactures Imagine pools, I was wondering since they looked so similar. Looking great and congratulations. The key is packing that tanning ledge so there is no gaps. Takes patience and improvised tools to ensure the fill gets packed in there just right!
 
  • Like
Reactions: Casey
Turns out Leisure pools manufactures Imagine pools, I was wondering since they looked so similar. Looking great and congratulations. The key is packing that tanning ledge so there is no gaps. Takes patience and improvised tools to ensure the fill gets packed in there just right!

I was wondering that myself. I have never seen a fiberglass pool installed. I was wondering if they were going to use flowable fill or something similar to ensure there are no voids around the entire pool.
 
I was wondering that myself. I have never seen a fiberglass pool installed. I was wondering if they were going to use flowable fill or something similar to ensure there are no voids around the entire pool.
They will be filling the sides of the pool with the same base they used for the bottom of the pool. I actually got in the pool on the tanning ledge n it feels pretty solid the whole way across. They did a really nice job all around.
 
I actually got in the pool on the tanning ledge n it feels pretty solid the whole way across
Have the worker guy with the duck dynasty beard jump around on it. He was …. Um…. Ahem. Gotta be kind and all. *less dainty* than you.
 
Filled to bottom of the steps as instructed... my Duck Dynasty PBs have that pool sitting level. And I noticed a manufacturing defect. I went back to the video of the pool being backed in and you can see it there too. The left side long wall is bowed. Right side is perfect.
 

Attachments

  • 20211008_142008.jpg
    20211008_142008.jpg
    229.8 KB · Views: 72
  • 20211008_142030.jpg
    20211008_142030.jpg
    207.6 KB · Views: 72
  • 20211008_134931.jpg
    20211008_134931.jpg
    545.8 KB · Views: 72

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.