IC60 + IntelliPH not compatible? Need help.

jimbethesda

Gold Supporter
Jul 2, 2018
464
Austin, TX
The board on my IntelliPH fried for the second time in about a year. The warranty service company came out today and is now telling me that Pentair says the IC60 pulls too much current for the IntelliPH and Pentair wants to swap out my IC60 for an IC40.

Would an IC40 work? Sure, but I’m not happy. I like the flexibility of running my pump for shorter time.

So, here are my questions. What should I do? Have them swap out my IC60 for an IC40? Keep my IC60 but ditch my IntelliPH (and ask for my money back)? If I asked for a free intellichem, would that help?

TIA
 

Jimrahbe

Mod Squad
TFP Expert
LifeTime Supporter
Jul 7, 2014
19,781
Bedford, TX
Jim,

There is no reason to have the ipH..

But if you just want one, it does not need to be connected to the IC60.. I would just use the ipH tank and motor and use it like a Stenner pump. Use an aux relay to turn the pump on and off to control the amount of acid dispensed,,

Thanks,

Jim R.
 
  • Like
Reactions: jimbethesda

jimbethesda

Gold Supporter
Jul 2, 2018
464
Austin, TX
Jim,

There is no reason to have the ipH..

But if you just want one, it does not need to be connected to the IC60.. I would just use the ipH tank and motor and use it like a Stenner pump. Use an aux relay to turn the pump on and off to control the amount of acid dispensed,,

Thanks,

Jim R.
I have it already. Thanks for the idea.