@Dirk I thought it the intellicenter was controlling it then all the on button commands do not work...like I can up the chlorine % through the app so figured that meant the buttons were not active?
Ah, OK, now I know what you meant. Thx. I don't actually know the answer. A Pentair VS pump works that way, the automation controller takes over the interface and locks out the pump's onboard controls. I don't know the same is true for their IntelliChlor SWGs. Mine is down right now, so I can't check. I'm pretty sure I've checked the Hours Remaining on mine, while it was still being controlled by my EasyTouch. But I've never tried to adjust the output %.
Just try the button combo for Hours Remaining. It'll either work or it won't, it won't hurt anything.
@Jimrahbe, do you know which on-board buttons/functions of an IntelliChlor work and which don't when there is a Pentair Automation Controller present? Can you test the Hours Remaining? Can you change the output settings from the IntelliChlor and have them reflect in the Automation Controller's interface?
I know you can only get very rough output percentage adjustments from the IntelliChlor itself: 2,4,6,8,10,20,40,60,80,100%, you can't get the one-percent increments you can get from the Controller, which is why I've never even tried to do that with mine.
