- Jul 21, 2013
- 65,173
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Iaqualink. IQ30-rs
- Thread starter Shiva.n
- Start date
So now go to this page and assign the JVA to the AUX button you want.
Yep. I’m there. I got cleaner and solar working with 2 of my jva’s now. So those work well. . There’s one more for my water feature that’s not working. it’s plugged into “intake” on the app intake says “used”
- Jul 21, 2013
- 65,173
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I suspect you had a pool only Aqualink board before and now got a Pool/Spa board.
With a Pool/Spa board the Intake and Return JVAs are assigned to be used for POOL mode and SPA mode. There is no way to change that.
With a Pool/Spa board the Intake and Return JVAs are assigned to be used for POOL mode and SPA mode. There is no way to change that.
Last edited:
- Jul 21, 2013
- 65,173
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Thanks for all the help. everyone. I guess im at a dead end here. Ill call the pool company where I bought the IQ30 and see my options. keep u guys posted.
Did you get your issues resolved? I am about to buy IQ30, worried I may run into similar issues. I only have Aux 1 - pump and Aux 2 - lights. Heater should not be an issue and spa is controlled via the actuator.