I need one more thing.

[Chrisamato]

I finally got the filter to stop leaking and the skimmer to fill up, but here's another problem, the gauge keeps rising to 20 and I have the right amount of de in it, I've tried everything I know.
This filter/ pump is a little more than 1 year old and I've already done the acid bath 2 times last year I had the same issue last year I've replaced de as well
Here are some pics.
Any suggestions

 

[Texas Splash]

I have three thoughts that come to mind:
- What does your gauge fall to when the system is off? Does it go to zero? If not, perhaps the gauge is bad.
- You have algae (even if still clear) and the filter is doing what it's supposed but getting overwhelmed.
- You have an obstruction that is causing an increase in pressure

I would like to start with a full set of water test results of your own from your TF-100 or Taylor K-2006C. Let's rule-out the easy stuff first.

 

[Chrisamato]

Ok I'll test late or tmrw I am not home thanks alot!