HP of my Pump

[Dman77720]

I am getting accustomed to my new pool and equipment and everything is going pretty smooth however I am having a hard time determining the HP of my STA RITE variable speed pump. I know my pool contract said 2hp but I can't seem to find this in any of the literature that came with my pump and the stickers on it don't clearly state the horse power? Is the HP somewhere buried in the picture below

 

[mknauss]

That part number does not match up with a Pentair pump. Take a picture of the whole pump and post it.

 

[mknauss]

I think that is an Intellipro VSF. A trade grade. Should be 3HP. Same as Intelliflo VSF. 011056

 

[Dman77720]

Thanks Marty I found this label too

 

[Dman77720]

Here is the pump

 

[mknauss]

Sta-Rite IntelliPro VSF Variable Speed Pump 013004. Same as the Intelliflo VSF 011056

 

[mknauss]

I say same as the Intellflo VSF -- the function is. The overall design is different. Not a big deal. Good pump.
We recommend running in RPM mode. GPM mode can mask issues such as a dirty filter, etc.

 

[Dman77720]

I am curious since you are in the same area as me what RPM you run yours at for the SWG. I have the SWG installed but I have a few weeks before I will be adding salt but I have been playing with the my variable speed schedule. My pool builder said I should run it 8-10 hours a day around 2900 but they have not given me the best advice to date and the pool school articles didn't give me a ton of direction.