I have a del aop 50 and it’s great but the red light comes on during my programmed scheduled cleaning every night. This is insufficient flow. When I manually use a higher rom the red light goes away. Currently the auto pool setting is like 2,200 rpm but I want to change that to 2,700 rpm. I don’t know how to re-program this. The mobile has a programming section but there’s nowhere to change the rpms of certain mode. But I don’t know how to make the Intellitouch change that auto setting. Any advice would help or any recommended videos too. Thanks.
How to re-program intellitouch/mobile touch 2
- Thread starter pauliedbk
- Start date
- Jul 21, 2013
- 54,918
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
What model VS pump do you have?
See page 66 in https://www.pentair.com/content/dam...h-pool-control-system-users-guide-english.pdf
See page 66 in https://www.pentair.com/content/dam...h-pool-control-system-users-guide-english.pdf
I have the intelliflo Variable Speed pump. But thank you for sharing. I was able to find the right circuit, and I changed the rpm, much appreciated.
Last edited: