Hi all!! Iām trying to figure out how to hook up this waterfall fountain to my Intex pool. Pictures attached of current setup. I know I need some additional pvc or adapter or something I just canāt figure out what!
- Jun 22, 2014
- 52,018
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Did you figure it out yet? Below are some examples of others from the AGP forum. If you still need help let us know.
www.troublefreepool.com
www.troublefreepool.com
www.troublefreepool.com
Intex Fountain Adapter
I wanted to use a store-bought fountain with my Intex pool, but couldn't find anyone making an adapter to make one work. Instead of fabricating a fountain, I had the idea of modifying an Intex inlet to accept standard 1.5" fittings inside the pool. I made a step-by-step guide for it if you...
www.troublefreepool.com
Installing a fountain in a Intex Ultra Frame
Hi everybody, I've just joined TFP after getting my first Intex 24' Ultra-Frame pool. I'd like to thank everybody for all the great info on the board that helped me get started. Now, to the problem: I'm trying to fit a fountain to the pool to try and cool the water down that's gotten "a little...
www.troublefreepool.com
I installed a fountain in my Intex ultra Frame pool
This is the fountain, purchased at my local pool store (I left before they could sell me anything else :goodjob: ). And my granddaughter under the fountain after we finished. In the next post I'll show the parts that I used.
www.troublefreepool.com
I think so! I ordered the 1.5ā Hayward SP1023 1.5ā inlet. It will be here tomorrow. Although I think I realized I didnāt even need it 
. Or I may have just needed the seal. I watched a few videos on how to cut the liner and I will attempt that tomorrow 
. Thanks for responding!! You guys really need to infiltrate my above ground pool fb group 
. Or I may have just needed the seal. I watched a few videos on how to cut the liner and I will attempt that tomorrow . Thanks for responding!! You guys really need to infiltrate my above ground pool fb group
I think so! I ordered the 1.5ā Hayward SP1023 1.5ā inlet. It will be here tomorrow. Although I think I realized I didnāt even need it
. Or I may have just needed the seal. I watched a few videos on how to cut the liner and I will attempt that tomorrow . Thanks for responding!! You guys really need to infiltrate my above ground pool fb group
Itās working!!! Would probably work better if I had a better pump, but will do for now! Itās supposed to light up at night, we shall see. Of course the kids are now fighting over who gets to stand under it 