- May 3, 2014
- 62,759
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Once you go past the 1:1 dilution, the error gets really big.
You need to really drain.
Probably the best way is to get a high rate sub pump from Home Depot. They rent them. Start draining the moment the sun is off the pool. Start filling immediately when you have drained 80+% of the water. As fast as you can. If sun starts to hit the plaster keep it wet.
This is a tough one.
Take care.
You need to really drain.
Probably the best way is to get a high rate sub pump from Home Depot. They rent them. Start draining the moment the sun is off the pool. Start filling immediately when you have drained 80+% of the water. As fast as you can. If sun starts to hit the plaster keep it wet.
This is a tough one.
Take care.