HI!
Have searched everywhere and can't narrow down the answer.
Using test strips, on 10x30 Intex 1000 gal quickset. Pool had heavy usage for 2 days, very cloudy. Started off this morning with zero TC & FC. Shocked with Clorox Xtra Blue 6 in 1, used 3oz and now my CC is very high.
Daily chlorine added is 2/3 cup household Clorox Bleach.
I assume the CC is going high as its working to clean and sanitize, but my questions are this...
Am I not using enough bleach daily?
And do I need to shock again?
Is high TC part of the shock process?
From what I read it would seem I need to SLAM and need a real test kit.....but..
It did this last time I shocked. I added small amount of PH down as it appeared to be a little high on the acceptable range and the next morning TC was back down to .5 matching FC. I added bleach and was good for the day.
So where did the chloramines go?
Attaching pic of test strip.
Any help is appreciated. My pool didn't come with a filter. I made one with a submersible pump 880gph attached to a 2 liter full of polyfill. I scrub sides, use a vacuum for debri, and move pump around a lot and whirlpool every hour or so.
picture is misleading as CYA shows 30-50 acceptable range in RL and PH at 7.6

Have searched everywhere and can't narrow down the answer.
Using test strips, on 10x30 Intex 1000 gal quickset. Pool had heavy usage for 2 days, very cloudy. Started off this morning with zero TC & FC. Shocked with Clorox Xtra Blue 6 in 1, used 3oz and now my CC is very high.
Daily chlorine added is 2/3 cup household Clorox Bleach.
I assume the CC is going high as its working to clean and sanitize, but my questions are this...
Am I not using enough bleach daily?
And do I need to shock again?
Is high TC part of the shock process?
From what I read it would seem I need to SLAM and need a real test kit.....but..
It did this last time I shocked. I added small amount of PH down as it appeared to be a little high on the acceptable range and the next morning TC was back down to .5 matching FC. I added bleach and was good for the day.
So where did the chloramines go?
Attaching pic of test strip.
Any help is appreciated. My pool didn't come with a filter. I made one with a submersible pump 880gph attached to a 2 liter full of polyfill. I scrub sides, use a vacuum for debri, and move pump around a lot and whirlpool every hour or so.
picture is misleading as CYA shows 30-50 acceptable range in RL and PH at 7.6
