Hello, I am trying to figure out what my pool builder did. I have attached photos, but in essence I have a Superflo VS, IC40 Chlorine Generator, and an easy touch 4 panel. I also have a valve actuator for deck jets. Okay, so pump is wired up and had a communication cable that is not connected to anything, so all pump functions are controlled on the pump. If I push the “Filter/Pump” button it turns on the SWG next to that is the lights feature, and next to that is water feature which turns the valve actuator. Lights and valve actuator appear to be fine, just trying to figure out how to deal with SWG being on the “Filter/Pump” circuit. Any help appreciated