Help with Hayward OmniLogic System

Bamaboy1993

New member
Nov 22, 2019
2
Charlotte, NC
Need some help...Finally our pool construction is complete and I opted to add the Hayward OmniLogic automation system. Currently it controls my spa pump and blower, pool pump, pool heater, multiple actuators and pool lights. I am in the process of installing low voltage landscape lighting and sound around the pool and want to wire it into the system so I can control everything through the app.

The instructions from Hayward are very unclear on how to add components to the system. I have basic electrical knowledge so I know I could do the work. I am just looking for someone to describe in detail how to for instance add a low voltage transformer control to the system. I am confident once I know how to do one I could add other features down the road. I just want to make sure I do the first one correctly. I have searched the internet high and low and not been able to find any videos are detailed descriptions on how to do this.

Any help or tips is greatly appreciated.

Newbie to this site.
 

Jimrahbe

Mod Squad
TFP Expert
LifeTime Supporter
Jul 7, 2014
17,027
Bedford, TX
bb,

I am not a Hayward guy, but the basic set is the same for all automation... You would use an Aux relay to apply 120 volts AC power to the landscape lighting.. You would then schedule the Aux relay to come on and off at a specific time, or manually with your app. I really doubt that you would be able to control an audio system other than to turn it on/off...

Let's see if we can get one of our Hayward guys to chime in..

Thanks,

Jim R.
 

ajw22

Gold Supporter
TFP Guide
Jul 21, 2013
16,219
Northern NJ
bb, Welcome to TFP.

First question is do you have any Aux Relays available to switch the transformer on and off?

Take a look at the wiring of your Omnilogic Load Center and post pics of the wiring if you need help.