There is a 2" dedicated line that was put in when the pool was installed for the purpose of adding a water feature. I have a 3-way valve that can be adjusted between the return jets to the pool and the water feature line.
I'm still working on the overall design (using methods of "decorating" pvc to look like bamboo, etc.), without using using heavy stones or rocks. But as far as the actual exit point(s), I plan to us smaller sized pvc to create multiple spouts or a small cascade.
My first question what is the best way to connect the existing 2" pvc to use smaller sized pvc? Secondly, even though I can control the flow from the 3-way port, do I need to add a ball valve at the water feature location for additional control?
I've illustrated where the flex line leads up to the pool since I have everything temporarily covered in weed fabric. (and all the oak tree debris!)
Three way valve to return jets and water feature line.
I'm still working on the overall design (using methods of "decorating" pvc to look like bamboo, etc.), without using using heavy stones or rocks. But as far as the actual exit point(s), I plan to us smaller sized pvc to create multiple spouts or a small cascade.
My first question what is the best way to connect the existing 2" pvc to use smaller sized pvc? Secondly, even though I can control the flow from the 3-way port, do I need to add a ball valve at the water feature location for additional control?
I've illustrated where the flex line leads up to the pool since I have everything temporarily covered in weed fabric. (and all the oak tree debris!)
Three way valve to return jets and water feature line.
