Hi everyone, love TFP and it's helped me have a gorgeous pool for five years now with minimal hard work.
Here is my story -- I had to close my pool dirty last fall. Lost power to pool pump and SWG and pool got leaves and was a mess and no one could come fix the power and it was freezing each night and I was worried about the pipes. So I drained it down to empty the pipes and covered it until now. Maybe that wasn't best but here we are.
Just got new power to pump and SWG and took the cover off. Full of leave and water is green. I refilled pool from the well over the last three days and had the robot vacuum running multiple times a day. I started the pump last night and after three hours tested the water.
pH LOW (very yellow) FC 0 CYA 40 TA 50 Salt 2200 water temp is 60 and SWG is off.
I planned to start a SLAM tonight because I am home now tonight and all day tomorrow. Last night I went ahead and added a whole box of Borax Mule and three bags of salt I had at home. I also added two gallons of liquid chlorine because I couldn't help myself.
Pool has been circulating for the past 24 hours and I've ran vacuum twice more and kept skimmer clean and backwashed once this morning.
Now I'm ready to start the official SLAM so I tested again. 99% leaves are out, water is fairly clear but pool is green.
pH up to 7.0 and FC 10
Can you explain why only two gallons of bleach last night brought FC from 0 to 10 and none seemed to get consumed in the past 24 hours?
Any body have any other suggestions as I start to SLAM?
Here is my story -- I had to close my pool dirty last fall. Lost power to pool pump and SWG and pool got leaves and was a mess and no one could come fix the power and it was freezing each night and I was worried about the pipes. So I drained it down to empty the pipes and covered it until now. Maybe that wasn't best but here we are.
Just got new power to pump and SWG and took the cover off. Full of leave and water is green. I refilled pool from the well over the last three days and had the robot vacuum running multiple times a day. I started the pump last night and after three hours tested the water.
pH LOW (very yellow) FC 0 CYA 40 TA 50 Salt 2200 water temp is 60 and SWG is off.
I planned to start a SLAM tonight because I am home now tonight and all day tomorrow. Last night I went ahead and added a whole box of Borax Mule and three bags of salt I had at home. I also added two gallons of liquid chlorine because I couldn't help myself.
Pool has been circulating for the past 24 hours and I've ran vacuum twice more and kept skimmer clean and backwashed once this morning.
Now I'm ready to start the official SLAM so I tested again. 99% leaves are out, water is fairly clear but pool is green.
pH up to 7.0 and FC 10
Can you explain why only two gallons of bleach last night brought FC from 0 to 10 and none seemed to get consumed in the past 24 hours?
Any body have any other suggestions as I start to SLAM?