It's actually a Aqua Nature. Not sure of the difference. Anyhow, brand new T5 Turbo salt cell. Definitely generating plenty of chlorine, the problem is I have tested the water with my calibrated TDS meter and it is currently at 2700 ppm. The panel says 4500. I've followed the known steps to calibrate it (Switch from Auto to off, back to auto, press diagnostic button 5 times, then wait until it counts down, then switch to superchorinate and back at correct level. It never counts down, just sits at whatever the original reading was, in this case 4500 today. ) Eventually it resets to regular monitoring mode.
So, my question is: Since it's clearly producing chlorine and I can test it myself without the panel, is there a problem just leaving it as is and monitoring the salt level manually? Will the erroneous panel reading somehow affect the salt cell in a negative way?
Thanks in advance for any advice.
S
So, my question is: Since it's clearly producing chlorine and I can test it myself without the panel, is there a problem just leaving it as is and monitoring the salt level manually? Will the erroneous panel reading somehow affect the salt cell in a negative way?
Thanks in advance for any advice.
S