Great
![Thumbs up: light skin tone :thumbsup_tone1: 👍🏻](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d-1f3fb.png)
add that info to your signature.
That cell has got plenty of production for your size pool. 1.47 lb/day
If u run your pump all the time it looks like 20-30% should do it.
The average algae free pool consumes 2-4 ppm daily +/- For environmental conditions/seasons
You can play around with run times & percentages in
PoolMath effects of adding in the hamburger menu.
Select SWG, then type in 1.47 or use the search
![Magnifying glass tilted left :mag: 🔍](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f50d.png)
to find your cell.
As an example,
Here’s what 24hrs @ 20% looks like in your pool volume
View attachment 435781
Most with variable speed pumps & swg’s run at a low rpm (1200-1400) pretty much all the time & then just adjust swg percentage. That’s the beauty of the vsp- the ability to produce fc, skim, & filter around the clock if u like without the hit to the electric bill.
If you get a low flow warning
![Warning :warning: ⚠️](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/26a0.png)
on the swg you will know its set a little too low & u should bump up the rpms a little.
When u get done with the slam you can tinker with it to suit your needs.
For now swg should be off & pump running 24/7 at whatever speed effectively skims. Some say around 1800rpms or so. You wanna be constantly filtering the dead stuff out.
Don’t forget to clean your filters when pressure rises 25% over clean pressure.