Have spent weeks trying to get my chlorine levels up in my saltwater pool. Cell is ~5 yrs old. Had very minimal scale but cleaned in muriatic acid mix. No error codes showing. Chlorine production set at 50% then 60% . Still no chlorine in the pool. Have tried Boost 3 or 4 times in the last week but still have the same issue. I cleaned the cord contacts after 120 code came on during one of my attempts (some yellow gunk came out - likely from the WD40 I sprayed during an earlier attempt). Help - I am having to shock the pool every other day
fusion soft 1400 - not producing chlorine
- Thread starter Big F
- Start date
- May 3, 2014
- 59,290
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum!
Can you post a full set of test results? Is the SWCG creating hydrogen gas bubbles when it is generating?
What does the water look like?
I suggest you read through Pool Care Basics - Trouble Free Pool and even look at a few of our videos TFP-TV - Trouble Free Pool
Can you post a full set of test results? Is the SWCG creating hydrogen gas bubbles when it is generating?
What does the water look like?
I suggest you read through Pool Care Basics - Trouble Free Pool and even look at a few of our videos TFP-TV - Trouble Free Pool