Forgot to raise FC level for a while after raising CYA

[jake556]

So with it warming up in AZ I raised my CYA to 50ppm from 30ppm in the winter. I was always maintaining a 3-6 FC all winter no issues. Well I raised my CYA a few weeks ago and forgot to adjust my FC Range (5-8). My pool doesn’t look as crystal clear as it did before what Im wondering is what is my next step? Just keep the FC in range? Or do I need to do anything additional? Here are my current readings. Appreciate the info thank you

FC 9.5 CC 0
PH 7.8
CYA 50
ALK 120

 

[mknauss]

You can raise your FC to SLAM level and see if it clears. Might need to maintain for a day or two.

Lower your pH to 7.2 first. You might find that even fixes it.

 

[jake556]

You can raise your FC to SLAM level and see if it clears. Might need to maintain for a day or two.

Lower your pH to 7.2 first. You might find that even fixes it.

Thank you!

 

[jake556]

Ok just to verify, Ill lower my PH to 7.2, then raise FC to 20 and maintain for a couple days per the chart for 50 CYA level.