First, thanks for all the info I have found on this site. My question, can I stack 1 inch thick foam boards under a 16x48 intex to get 2 inch of foam? I cant find 2 inch thick in my area, and I really want to do the foam base. Thanks for any help
I see no reason why it wouldn't work, provided you securely tape all seam on both layers. It would also be a good idea to offset the seams so layer 1 seams don't line up with layer 2.
I had seen on a thread on here of laying the foam down and then cutting the holes to lay the pavers into and it was all level that way, as long as the ground beneath was level, which by the way it was. thanks for the idea of offsetting the seams. I have no clue about the pool description under my post. I am in tennessee
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!