I’m looking for this return valve it’s a retro fit with only one thread to screw into the 
Flush retrofit pool return valve
- Thread starter Maggieirwin
- Start date
- Jul 21, 2013
- 65,110
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Looks like an Aquastar....
www.aquastarpoolproducts.com
AquaStar Pool Products | Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits 1" or 1½" Pipe)
AquaStar manufactures one of the most comprehensive selections of fittings in the pool and spa industry for gunite, vinyl, and fiberglass.
www.aquastarpoolproducts.com
Don't you just love all the pros on here that can recognize parts for people? It's wonderful!
- May 23, 2015
- 25,695
- Pool Size
- 16000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
This site might work -
www.poolfittings.com
Flush Mount Return Fittings — Color Match Pool Fittings
Flush Mount Return Fittings for in-ground swimming pools and spas.
www.poolfittings.com
- May 23, 2015
- 25,695
- Pool Size
- 16000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I have similar fittings … I hate the way the eyeballs are retained in by that single thread locking ring. So incredible hard to get out as the threads really lock up over time and the installers usually just thread them in tight from the get-go.
If I had only known then what I know now …
If I had only known then what I know now …
Similar threads
