- Mar 25, 2019
- 547
- Pool Size
- 11300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-30 Plus
Hey all long time no post, which is a good thing as I’ve had zero problems since going salt. This is my first winter with it.
It’s Houston, so right now the temps are all over the place but I definitely don’t have the chlorine demand from the UV and heat that I used to. I stared getting FC readings of 25 so I turned the cell down to 75 percent.. a week later 18FC. Turned it down to 50% and still at 15FC. I don’t mind the higher FC but also don’t want to use my SWG more than I need to. Should I just leave it at 25 percent and let it ride? Wondering what people in similar climates are doing.
It’s Houston, so right now the temps are all over the place but I definitely don’t have the chlorine demand from the UV and heat that I used to. I stared getting FC readings of 25 so I turned the cell down to 75 percent.. a week later 18FC. Turned it down to 50% and still at 15FC. I don’t mind the higher FC but also don’t want to use my SWG more than I need to. Should I just leave it at 25 percent and let it ride? Wondering what people in similar climates are doing.