Disregard. Posted before reading entire thread.
- - - Updated - - -
What that means?
For today, use poolmath to adjust the pH and raise the FC. I get 1.5 measuring cups of bleach and 1/2 cup of the Kem Tek PH PLus.Results
PH 6.8
Chlorine 0
TA 40 ppm
CH 50 ppm
What I have to do and add now?
Soda ash is best added by pre-dissolving it in a bucket of water and then pouring that slowly in front of a return.Thanks Richard
Without you I think Im going to change the pool water every 2 weeks. But I like it and I want to learn to do it right
The ph plus is powder, I add 1/2 with the sock like the Cya?
And after 30 min 1 and 1/2 cup of bleach and that it?
I just added the 1 1/2 cup of bleach and after 30 minutes I tested and I have
PH 7,6 -7,7
Chlorine 5-10. Really high.
Is ok right?
Tomorrow Im gonna have 0 chlorine again. So if nothing else happens im gonna post my new results tomorrow evening.
Thanks Again
Is OK if I cover the pool every night?
Yes. It's just that simple.Hi, I tested the water and the result is
PH 7,6
Chlorine 2 (between 2 and 3)
Let me see if Im wrong: I must only add 7,2 oz of 8,25 bleach to Target 5? Is that right?