- Feb 15, 2017
- 704
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Ok, if you didn't see my opening thread, I'll link it here. I had the worst opening in the 5 years I've been doing this because we had a big hole in the cover. essentially, my pool water level got super low and it opened to green, but clear. after 5 gallons of Chlorine were added, the pool was blue. I'll post a picture from today here. it's blue and very very clear. Here's the thread from a couple days ago. since we were green, I will do an OCLT tonight.
Test results:
ph: 7.5
FC .5
CC .5
CH 250
TA 90
salt 1,000
CYA - less than 20, i'm guessing none
so, being that I'm doing the OCLT tonight, what do I do right now? Add chlorine I assume and start my CYA?
Test results:
ph: 7.5
FC .5
CC .5
CH 250
TA 90
salt 1,000
CYA - less than 20, i'm guessing none
so, being that I'm doing the OCLT tonight, what do I do right now? Add chlorine I assume and start my CYA?