Pool: 32’ x 16’ x 52” (55,000L)
Filling my pool for the first time. The following sequence correct?
My question:
Filling my pool for the first time. The following sequence correct?
- FC: SWG - Waterco Hydrochlor MK3 3000 (30g/hr)
- Recommended TDS levels (ppm) by manufacturer (min = 4,000 Optimum = 5,500 Max = 6,000)
- Based on Pool Math, I need 300kg (12 x 25kg/bag) to get the salt level from 0 to 5,500 ppm.
- Adjust CYA to 70-80
- Run pump for 4hrs/day, set SWG to medium, monitor FC within 4-6 ppm.
- Adjust TA to 70 ppm.
- Adjust PH to 7.5 PH.
- Adjust CH to > 50 ppm & < 300 ppm.
- Adjust Borate to 40 ppm.
My question:
- How much of each of the following chemical required to maintain the pool chemistry, assuming the supply can last for a month:
- FC: salt (kg)
- CYA: Cyanuric Acid (kg)
- TA: baking soda (kg)
- PH: muriatic acid (L)
- CH: calcium chloride (kg)
- Borates: Borax (kg)