So I finally got my pool tiled, all Bisazza glass mosaics, and will be filling in a few weeks. The quipment will be set in a week or so. The list below is tentative. Pretty solid except for the IntelliCenter. Not sure that it's needed. I'm just thinking that the Easy Touch might a little easier to understand for everyone here. We will have one pump IntelliFlo VSF 3hp. I guess I'm posting this way ahead of filling so's I might get a little insight. This is my 2nd all tile pool. I actually had an account here back 10 years or so ago so it's not my first pool and have some experience. We are however filling with well water and not city water this time. I had the well water checked a few weeks ago but bein so busy I lost the results. I do know that there is no iron present and also remember that there was nothing off the charts. The ph from the well is 7. The plan is to fill with 2 hoses from the well and dump some chlorine in. I will have another sample done at the local pool store and try to be prepared to get everything in balance. Anyway, any tips on a well water start up will be appreciated.