ft,
The EasyTouch has one com port, but several com connectors that are all electrically the same. The SWCG board must be connected to J20 otherwise you will not be able to control your SWCG. The IntelliFlo can also be connected to J20 or any of the three com ports on the SWCG board.
I guess the SWCG card could be intermittnetly bad, but I doubt it.. More likely a bad connection.
Thanks,
Jim R.
The EasyTouch has one com port, but several com connectors that are all electrically the same. The SWCG board must be connected to J20 otherwise you will not be able to control your SWCG. The IntelliFlo can also be connected to J20 or any of the three com ports on the SWCG board.
I guess the SWCG card could be intermittnetly bad, but I doubt it.. More likely a bad connection.
Thanks,
Jim R.