Electrical is getting wired up on Monday for or new pool and I am curious how many relays are going to be used up and some other wiring questions. Below is what I will have initially.
- EasyTouch 4 cabinet with ScreenLogic2
- Intelliflo pump
- 1 Pentair GloBrite light (Seperate transformer?)
- Pentair 522473 chlorine tank (See question below about this)
- Future Gas Heater
My questions...
1. Which devices above will use up a relay? I know the intelliflo has a communication cable the plugs in but does it also need to be hooked into Relay 1 which is labeled as pump? Or can that be repurposed?
2. The GloBrite came with a transformer and Intellibrite. I assume I will not need the Intellibrite controller but will I need the transformer or is there one built into the EasyTouch?
3. Can I use the chlorine tank as is without intellichem? My intention was to just have it run a fixed amount of time per day like a lot of you do with the stenner pumps.
- EasyTouch 4 cabinet with ScreenLogic2
- Intelliflo pump
- 1 Pentair GloBrite light (Seperate transformer?)
- Pentair 522473 chlorine tank (See question below about this)
- Future Gas Heater
My questions...
1. Which devices above will use up a relay? I know the intelliflo has a communication cable the plugs in but does it also need to be hooked into Relay 1 which is labeled as pump? Or can that be repurposed?
2. The GloBrite came with a transformer and Intellibrite. I assume I will not need the Intellibrite controller but will I need the transformer or is there one built into the EasyTouch?
3. Can I use the chlorine tank as is without intellichem? My intention was to just have it run a fixed amount of time per day like a lot of you do with the stenner pumps.