I have a Pentair Easy Touch Pool controller with remote. It has worked fine for years, but now I can't get the remote to connect with the controller. I have tried the reset process (send address) several times, but it never connects. This problem started after losing power to our house one night. Everything on the main controller is working fine. I thought the problem might be in the Virtual Cable antenna. I opened it to see if it was working. It has a power light and the 485 Link and RF link are blinking in some kind of pattern, but I don't know if that is good or bad. Does anyone know how to tell if the antenna is communicating? I don't want to spend $300 on a new one if that isn't the problem.