Drop in replacement?

[vgomez1]

The swg in my pool has been inop since I purchased, so I’ve always used chlorine. Does anyone know if there’s a drop in replacement and if the install is easy enough for a homeowner to do? Thx!

 

[mknauss]

That is a Jandy Aquapure system. To purchase a replacement system that is Jandy, you must go through a pool professional/store.

If you would prefer to do this DIY, then we need pictures from farther back to see how you would install a system.

A Jandy system might integrate with your automation.

 

[vgomez1]

Thx, let me know if these pics work.

 

[vgomez1]

Pics attached, let me know if additional needed. Thx.

 

[vgomez1]

??

 

[mknauss]

Very tight plumbing. If you wish to do DIY -- take a look how you are going to replumb that run from the heater that contains the SWCG.

 

[vgomez1]

Thx. Is the pvc the most challenging part of the replacement? Is the rest ok as a diy? Is there s specific drop in replacement? Thx again!

 

[mknauss]

PVC will be the most challenging.
Not sure what you mean about the rest ok as a DIY. You will need to run the power cord to your automation and power the SWCG from the Load side of the pump/filter relay.

I would think an Aquapure 1400 might fit. Yours is an older model so not sure if it has changed. You would need to call a Jandy dealer for purchase and installation.