My Dolphin Active 30i stopped turning side to side today. It is actually automatically turning itself off after about a minute of starting now as well. If I put it in manual drive I can move forward and back fine. However, trying to turn it just pops a wheely and sets back down without actually turning. I assume this means the tracks actually don't do the turning and it uses water being pushed through the unit to turn. I took the top part off which exposed a fan that did have some hair tangled around it. I clean that all up but it didn't help.
The app does show a exclamation at times that says "servo underload".
Anyone have any ideas/videos of things to try? Sunplay.com says my model is the same as all of these:
Doheny's Mercury = Dolphin Active 30i = Dolphin S300i = Dolphin Triton Plus (2017 and Later) = Pentair Prowler 930 = Dolphin Proteus DX5i
The app does show a exclamation at times that says "servo underload".
Anyone have any ideas/videos of things to try? Sunplay.com says my model is the same as all of these:
Doheny's Mercury = Dolphin Active 30i = Dolphin S300i = Dolphin Triton Plus (2017 and Later) = Pentair Prowler 930 = Dolphin Proteus DX5i