The M600 looks like it is connected but my phone app cannot connect with it. What's the easiest way to re-establish this?
Dolphin M600 Loses WiFi to App?
- Thread starter les_garten
- Start date
jimbethesda
Gold Supporter
- Jul 2, 2018
- 648
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I rebooted the phone. That's my question, I don't know how to reboot the M600. Last time I unplugged it, it seemed to loose it's schedule. Do I just unplug the power supply from the wall, or unplug the robot from the power supply?
jimbethesda
Gold Supporter
- Jul 2, 2018
- 648
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
jimbethesda
Gold Supporter
- Jul 2, 2018
- 648
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
My M500 doesn’t, not sure about the M600. The phone app connection to the M500 is awful. Very slow, and the manual control is useless because there is a 1-2 second delay. I thought the M600 was improved in this area, but it doesn’t sound like it.
Sorry I can be more helpful.
So I power cycled the PS and just like last time, it loses it's schedule. That was why I was trying to avoid that.
jimbethesda
Gold Supporter
- Jul 2, 2018
- 648
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
jimbethesda
Gold Supporter
- Jul 2, 2018
- 648
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Unfortunately I think unplugging is the only way to fix it. My schedules get zapped often too. I only use it if I’m going out of town now, and sometimes they get zapped in the middle of my vacation!
Dolphin robots are great, but the phone app and software on the control panel sucks.
Similar threads
