Dolphin M500 wiring question

[TXtransplant]

Anybody here happen to know how to rewire the amphenol plug socket for the floatimg cable on an M5 Dolphin? I had a loose wire and when removing the socket from the power supply 3 wires came loose. Unable to find a wiring diagram anywhere. It is four color, Y, R, B, Brown.

 

[Jimrahbe]

TX,

I have an old cable that I can look at..

Just to be clear... The end you show in your pic is normally plugged into the power supply??? Is that true?

Thanks,

Jim R.

 

[Mike1162]

Here's where the wires are connected on my S200.
#1 - Orange
#2 - White
#3 - Black
Ground symbol? - Red

I realize your wires are different colors & this may not be any help but maybe the pics will help you figure it out.
Note #1 is the orange wire above the number not the white wire.

 

[Jimrahbe]

Tx,

My cable must be different than yours.. Either that or I am a dumb as rock.. It appears the end of my cable, that plugs into the power supply is molded in place as I can't see any way to get it apart...

Mine only has three wires anyway..

Jim R.

 

[Mike1162]

It's not the cable, he needs the pin outs for the plug that's built into the power supply. The cable for my S200 only uses two wires.

 

[Jimrahbe]

Mike,

I have an S300i power supply and it has identical color wires as you listed above..

Thanks,

Jim R.

 

[Mike1162]

My power supply says Advanced 115. It's strange we have same robot but different power supplies. IIRC mines 2 1/2 years old.

 

[Jimrahbe]

It's strange we have same robot but different power supplies

Mike,

I have several robots and power supplies.. They did not necessarily come together...

The one I looked at is not the one that came with my S200..

Jim R.

 

[Mike1162]

I see said the blind man.