Do I Have a Cell or Control Panel Problem?

[dukete]

Help! My salt system quit generating because panel keeps showing a low salt level. My manual tester shows 3100 ppm. I installed a new cell last June. I have attached current control panel numbers. Sorry about poor writing.

 

[ajw22]

Welcome to TFP.

Give us a hint as to what SWG system and cell we are talking about.

What manual tester are you using?

 

[ajw22]

Looks like you have a Hayward Aquarite system.

Remove your board and look for burnt solder joints around the K1 or K2 relays.

Examine the board for any burnt components.

Hayward Aquarite SWG - Further Reading

www.troublefreepool.com

 

[dukete]

Welcome to TFP.

Give us a hint as to what SWG system and cell we are talking about.

What manual tester are you using?

I'm using a SALT-3050 meter. It's a SwimPure System with a Blue Works T-15 Cell. I cleaned cell again yesterday and at least it is generating again. Salt is showing 2600 on panel after reset and 3100 on tester.