I’ve got a new Pentair intellichem system salt pool with acid dosing. I’ve got ORP dosing set to 8H (pool runtime ) with reset on power up. All worked pretty well for the past year when system was installed … it’s been pretty hot here in San Diego lately … could a shock treatment be required ?
Difficultly getting ORP to 650mV
- Thread starter bmf7777
- Start date
- Feb 6, 2015
- 7,848
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Post a full set of current test results from one of the recommended test kits.
Test Kits Compared
FC
CC
pH
TA
CH
CYA
Salt
Water temperature
ORP doesn't work well in a pool with CYA. And an outdoor pool will require CYA to keep the FC from burning off quickly in the sun.
What model SWG do you have - IC40 or IC60?
A pool maintained using TFP methods never requires shocking.
Test Kits Compared
FC
CC
pH
TA
CH
CYA
Salt
Water temperature
ORP doesn't work well in a pool with CYA. And an outdoor pool will require CYA to keep the FC from burning off quickly in the sun.
What model SWG do you have - IC40 or IC60?
A pool maintained using TFP methods never requires shocking.
