New here. My total alkalinity is 207 and ph is 7.7. I need to significantly lower alkalinity without decreasing ph too much. Looking for advice. I added dry acid and it brought alkalinity down from 280 to 207. It dropped ph very low. Added soda ash and it increased ph but also alkalinity.
Decreasing alkalinity without decreasing ph
- Thread starter ksudvm95
- Start date
- May 3, 2014
- 62,929
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum!
www.troublefreepool.com
www.troublefreepool.com
I suggest you read through Pool Care Basics - Trouble Free Pool and even look at a few of our videos TFP-TV - Trouble Free Pool
TA - Further Reading
www.troublefreepool.com
PH TA Relationship - Further Reading
www.troublefreepool.com
- Jun 24, 2021
- 17,171
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Welcome to TFP!!!!
Couple more links for you...
www.troublefreepool.com
www.troublefreepool.com
Couple more links for you...
Lower Total Alkalinity
A lower Total Alkalinity level can help a pool owner stabalize their pH increase. We'll explain how to lower TA with a little help from muriatic acid.
www.troublefreepool.com
Lowering Total Alkalinity (TA) Quickly with the Acid Aeration Method
Thought I'd make a post that might help others. We've had quite a few members this year with high TA, and I've been typing the same information over and over. I'm going to post this so I can link it to help others. High TA can cause rapid pH rise. High TA is typically caused by high TA fill...
www.troublefreepool.com
- Jul 21, 2013
- 66,560
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
www.troublefreepool.com
and dry acid is not good for your SWG…
www.troublefreepool.com
Lower Total Alkalinity
A lower Total Alkalinity level can help a pool owner stabalize their pH increase. We'll explain how to lower TA with a little help from muriatic acid.
www.troublefreepool.com
and dry acid is not good for your SWG…
Acid - Further Reading
www.troublefreepool.com
- Jan 7, 2012
- 2,151
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
You need a proper test kit.
Test Kits
You probably don't need a dedicated effort to lower TA. Just add MA to manage pH and let the TA come down with each MA addition.
Don't use dry acid. Use muriatic acid instead.
Keep your pH in the 7s.
You shouldn't have. pH will naturally rise, especially with low pH and high TA. Under normal circumstances, you should never need to add soda ash or baking soda.
Thank you for your help! I will order test kit and only add muratic acid.
