So it’s my understanding that cya doesn’t evaporate with the water at night. So I generally have to add around 10ppm every 2 weeks or so? Is this normal? Now my pool is full sun all day, no wind blocks so I do get a lot of evaporation at times. Also it gets used at least 3 times a week
Cya
- Thread starter R6acer
- Start date
- Jun 24, 2021
- 17,140
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
CYA degrades over time. It will degrade faster with warmer water. Completely normal.
You mentioned previously that your wife does pool store testing because you're away often, so I have to ask if that's based upon your own testing or the pool store testing?
20ppm per month of degradation seems excessive. If you have a sand filter, you also lose CYA when you backwash. Any process where water is physically removed and not evaporated.
My water in phoenix hits 90 degrees through much of the summer and I don't lose even 10ppm a month.
My water in phoenix hits 90 degrees through much of the summer and I don't lose even 10ppm a month.
- Jun 24, 2021
- 17,140
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Create a new thread in "Everything Else" and ask your questions...lots of folks know heaters and chillers.
- Feb 6, 2015
- 7,962
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
I've seen 20ppm difference in the AZ summers. And remember, the test could easily be off by +/- 10 - so part of the loss could be testing error..
No I switched over to cartridge filter and yea mine is hitting 90 in the evenings right now in GA