I'm getting a Hot Spring Spa with the built in SWG. They call it the Freshwater Salt System. They don't talk a lot about CYA in the Salt System Owner's Manual, other than to say that you should try to avoid CYA (Chlorine) lock. I did find the Dealer's FAQ that says the preferred level of CYA is zero, but up to 50ppm is fine. Sunlight generally won't be a factor because this is a portable/standalone spa with a cover. It might be used when in broad daylight occasionally but not much.
After reading the stickied post about using Chlorine in a tub, I feel like I should have some CYA in the water but I'm not sure.
The Owner's manual says the suggested levels of chlorine is 1-5 ppm with a target of 3ppm. That seems excessive if there is no CYA in the water.
The SWG on these tubs is miniscule and doesn't produce much chlorine, so should I just skip the CYA?
After reading the stickied post about using Chlorine in a tub, I feel like I should have some CYA in the water but I'm not sure.
The Owner's manual says the suggested levels of chlorine is 1-5 ppm with a target of 3ppm. That seems excessive if there is no CYA in the water.
The SWG on these tubs is miniscule and doesn't produce much chlorine, so should I just skip the CYA?