Does anyone have any photos or experience of what this installation should look like in regards to where and how the tray brackets get connected. I spoke with Coverstar and they told me the brackets actually get screwed into a 12" of concrete that we pour behind the polymer cover housing box, which means we are screwing through the housing into the concrete. Which is fine, but the top of the polymer box has a 2" lip that a metal beam runs though and it happens to be where we would be putting in our screws, so I'm a bit lost?
Coverstar Atom installation with Paver Trays
- Thread starter RyC
- Start date
- Jul 3, 2013
- 9,028
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-40
Welcome to TFP 
I wish I could help.. Most of these are installed by "the pros" and not us owners.. Maybe someone will come along and be able to help
I wish I could help.. Most of these are installed by "the pros" and not us owners.. Maybe someone will come along and be able to help
just seeing this now, here is a link to a similar post. I posted some pics there.
www.troublefreepool.com
Autocover lid - can I see pics of yours please
Hi there. We have an auto cover and are trying to figure out the masonry aspect of covering the box and the motor mechanism. What did you use ? How was it installed ? If you had brackets to support stone, how far apart were the brackets ? How easy is it to remove pieces to get to the motor for...
www.troublefreepool.com