Relatively new pool owner here trying to complete a pool set up and build. The pool has been running since July but the builder is still finishing various items on patio etc.
Equipment: Jandy with cartridge filter. Single Variable Speed Pump
Pool & Spillover Spa
Automatic Cover on Pool
Saltwater Pool
The next step is to reprogram the equipment to set up the circulation of the spa and the pool water to the filter/salt cell and eliminate the overflow from the spa to the pool so the cover can be 100% closed. (Spillover mode will be maintained as a manual mode only when cover is open)
Challenge: they are saying there is no way to maintain the pool and spa as a single body of water without the spillover as there are 2 modes.
Spa Mode. Pool mode. Each mode runs independently and there is no water exchange so I will have to test and maintain water separately.
This is really more of an issue in the 6 months of winter when we only use the spa and would not use the overflow.
Would there be a way to add a second pump or something to run the spa and pool simultaneously without the spillway?
Finally they are running my variable speed pump the same speed all 12 hours every day which I questioned. Shouldn’t we program differently?
Equipment: Jandy with cartridge filter. Single Variable Speed Pump
Pool & Spillover Spa
Automatic Cover on Pool
Saltwater Pool
The next step is to reprogram the equipment to set up the circulation of the spa and the pool water to the filter/salt cell and eliminate the overflow from the spa to the pool so the cover can be 100% closed. (Spillover mode will be maintained as a manual mode only when cover is open)
Challenge: they are saying there is no way to maintain the pool and spa as a single body of water without the spillover as there are 2 modes.
Spa Mode. Pool mode. Each mode runs independently and there is no water exchange so I will have to test and maintain water separately.
This is really more of an issue in the 6 months of winter when we only use the spa and would not use the overflow.
Would there be a way to add a second pump or something to run the spa and pool simultaneously without the spillway?
Finally they are running my variable speed pump the same speed all 12 hours every day which I questioned. Shouldn’t we program differently?