Good morning from chilly Parrish, FL. I need some help with a homemade condensation kit.
Condensation kit for my (2021) T115 AQUACAL pool. 12/13/24
- Thread starter Galagher747
- Start date
- Jul 21, 2013
- 66,235
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 66,235
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 66,235
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 66,235
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 66,235
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
AquaCal Heat Pumps - Further Reading
www.troublefreepool.com
DIY Condensation Drain for AquaCal Heat Pumps
AquaCal sells a condensation drain kit (STK0202) for around $100, but you can install essentially the same system with ~$5 of parts from the hardware store. It took me around 10 minutes to complete the job on my SQ150VS. For parts, I installed a 1/2" MIP threaded fitting initially with a 1/4"...
www.troublefreepool.com
Installation instructions...
Last edited:
Similar threads
