My first post! I opened my pool about 3 weeks ago. Changed sand before I started things up as it had been about 3 years and I ended last season with an algae problem and wanted a clean start. Water was clear when I removed cover but became cloudy before I could get everything ready to start it up. Vacuumed pool - without being able to see the bottom - and removed pine needles and debris. Added startup chemicals and ran pump 24/7 for 2 weeks with no clearing. Water is blue but cloudy and I can see dead algae floating. Decided to try floccing. Added Pool Season Liquid Floc - 8 Oz. Did not know to run pump on recirculate so ran 2-3 hours on Filter. Turned pump off and today marks 72 hours of resting water with no change in cloudiness.
1) Did I just ruin my new sand?
2) Since water is still cloudy, I can’t see if anything dropped - now what?
3) I do not use chlorine - I use Baquacil
HELP!!
1) Did I just ruin my new sand?
2) Since water is still cloudy, I can’t see if anything dropped - now what?
3) I do not use chlorine - I use Baquacil
HELP!!
Last edited by a moderator: