so this is my first year ever with a pool. My pool was built in 2008, it's a 24ft round 4ft deep above ground, with a hayward sand multiport valve pump. It was neglected & uncovered for 12 years. This year back in May I had the laterals changed & sand. After careful care I literally had the pool looking brand new. Now after at the beginning of the week I added stabilizer through the tube sock method but tied to a light, sqeezing it wvery so often. Then I added calcium hardness, etc. My mother & i swam Saturday. Sunday I woke up & the pool was cloudy. I added 4 cups of liquid chlorine because my levels were low & ph increaser because my ph was low. It's like a whitish translucent spec. I used a floc two days ago & woke up with water clear- didn't notice powder resting on bottom. I vacuum my pool with a volt fx-8 li manual vacuum & it mizrs it all up. I balanced my chemicals used a clarifier & skimmet sock & it's still floating & cloudy. What is it?
My levels at 2:59 pm:
FC: 4PPM
TC: 4PPM
CC:0
PH: 7.2
TA: 100PPM
CH: 200PPM
CYA: 80PPM
My levels at 2:59 pm:
FC: 4PPM
TC: 4PPM
CC:0
PH: 7.2
TA: 100PPM
CH: 200PPM
CYA: 80PPM