Clearwater LM2-24 - No flow light flickering

[ScubaDoo]

Hi everyone,

My "No Flow" light flickers when I up the output to two lights, and gets brighter the more I increase output. Doesn't change if I turn the speed of the pump up either (to increase flow), if anything it increases the brightness of the light as flow increases from pump.

I generally leave the SWG output at one light, but just wanted to increase FC a little.

Any tips?

Thanks!

 

[mknauss]

Sorry you have not received any replies Not a SWCG we see much of here on the forum.

Hopefully you have solved your issue.

 

[ScubaDoo]

Seems intermittent, still generating chlorine so I'll just go with it for now...

 

[ScubaDoo]

Just to put a wrap on this thread. Seems to have been a Salt level issue. The low flow light would come on at higher outputs because the SWG needed a high concentration of salt to generate more chlorine.

Must have got a bad reading on salt level last year from local store test because adding more bags of salt this year (as per manual) to get it to 4000ppm seems to have remedied any issues with output. I used Taylor Salt test strips to get a rough idea of where I was starting this year and added accordingly. Store test must have been way off...