Hi folks,
Going crazy on this one! I’ve had a Barracuda G3 working great for the past 5 years. Recently I replaced a few parts (diaphragm, foot, pad) and since then it cleans OK but everyday the hose disconnect itself from the wall vacuum port.
I suspect this may be occurring when the pump (and cleaner) cycle stops but I’m not sure. The hose just pushes into the port (as it always has) so there is nothing to screw or really plug-in. The vacuum suction usually makes it work. I’m baffled as to why this is suddenly a problem!! Any ideas??
Including a picture of the vacuum and wall connection. I can post some better pics of my setup if that would help! Appreciate any help.
Going crazy on this one! I’ve had a Barracuda G3 working great for the past 5 years. Recently I replaced a few parts (diaphragm, foot, pad) and since then it cleans OK but everyday the hose disconnect itself from the wall vacuum port.
I suspect this may be occurring when the pump (and cleaner) cycle stops but I’m not sure. The hose just pushes into the port (as it always has) so there is nothing to screw or really plug-in. The vacuum suction usually makes it work. I’m baffled as to why this is suddenly a problem!! Any ideas??
Including a picture of the vacuum and wall connection. I can post some better pics of my setup if that would help! Appreciate any help.