I'm just finishing my cheap DIY chlorine injection build and began running tests. I filled my tank with 10.5% chlorine and now realize my norprene pickup tube is floating to the top. How have y'all addressed this so that the pickup line doesn't float and suck air? I have some PVC and CPVC pipe laying around that I could affix to my hose so that it sinks, but, I am weary of potential cross reactivity with the undiluted chlorine bleach.
Chlorine Injection System DIY - Tank Pickup Tube Floating
- Thread starter camcdonald1
- Start date
- May 3, 2007
- 18,133
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
This is how I built mine:
www.troublefreepool.com
Homemade Acid OR Chlorine Injection System
Having a plaster pool with a SWG and fill water with high PH and TA has meant a constant battle with rising PH. I have tried the borax route with lowered TA but because of the high TA fill water, I haven't had much success in lowering my acid use. So I decided to look into acid injection...
www.troublefreepool.com