CC at 1 following SLAM?

PoolBrews

Well-known member
Oct 16, 2019
551
The Villages, Florida
Pool Size
6750
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Hayward Aqua Rite Pro (T-15)
Hello!

I just did my first SLAM on my new pool... followed the directions pretty well (I think). Once I passed the overnight test, it took 3 days for my FC to drop to below 10 - I was running at 28 for my CYA of 70. Pool is crystal clean, but my FC is at 9, and my CC is at 1. Shouldn't it be 0? Do I need SLAM again?

Complete readings today:

FC: 9.0
CC: 1.0
pH: 8.0 (already added muriatic to handle this)
TA: 110
CA: 400
CYA: 50

Thanks in advance!
 
Last edited:
Hello!

I just did my first SLAM on my new pool... followed the directions pretty well (I think). Once I passed the overnight test, it took 3 days for my FC to drop to below 10 - I was running at 28 for my CYA of 70. Pool is crystal clean, but my FC is at 9, and my CC is at 1. Shouldn't it be 0? Do I need SLAM again?

Complete readings today:

FC: 9.0
CC: 1.0
pH: 8.0 (already added muriatic to handle this)
TA: 110
CA: 400
CYA: 50

Thanks in advance!
Did the SLAM end up being a success? I’m at 70 cya and started a slam, some people say to partial drain.
Thanks
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.