- Sep 8, 2021
- 241
- Pool Size
- 10000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-9)
if you wanting to know if you should gather the tie wire cutoffs and rebar pieces I would not worry , they will get locked in place by the shotcreteshould I clear put any wite snippets or rebar clips in the dirt around the rebar?
You sound like me. Yep, I'm grabbing a magnet to clear it all out and gonna measure all the areas too. Lol.i also took the time to make sure the rebar was at least 3" away from the dirt in all places not just where the blocks are placed , so I excavated another 2o- 5 gallon buckets of dirt from my walls yours should not be so bad ,,
Aiiiight. Listen. If this is the worst thing that happens with your build, you and me are gonna LAUGH and laugh while smacking internet drinks together when this is done.First real stumble in this process and I feel like an idiot
It's just been so smooth to this point and the first time something went wrong it was MY fault. I don't like being the problem...Aiiiight. Listen. If this is the worst thing that happens with your build, you and me are gonna LAUGH and laugh while smacking internet drinks together when this is done.
The speedbumps come fast and furious once the build gets going and sometimes you'll zig when you should have zagged.
On the plus side, you don't need to track down the PB and somehow concince him to get right on it. So there is that.![]()
Your first equipment picture shows a tee off the pump w/ a FPT bushing. What's that for?Plumber out today and got most done. He will do spa Monday as rebar crew works. He runs both groups.
Not sure exactly which piece you are referring to.Your first equipment picture shows a tee off the pump w/ a FPT bushing. What's that for?
Not sure exactly which piece you are referring to.
Yup...that is it. It now has a spigot on it. Too muddy to go get a pic tho.hose bib is my vote
specially handy for draining off water on setups that don't use a backwash valve ,, but I think any system should have one
Not too shabby. Walls and all held up.How is your hole in the ground holding up with the rain today?
And turns out I had the right doc, the inspector just didn't see it in the plans. So then it rained, now it's muddy, so inspection now Friday. Been a week delay but that's OK.Aaaaaaaarrrrrgh
Need to get a doc from zoning and they don't answer the phone.
First real stumble in this process and I feel like an idiot.