How would I correct for possible high FC and CC readings with a Taylor Test Kit when I suspect it may be getting affected by potassium peroxymonosulfate
buffering FC reading from KHSO5
- Thread starter Palo Verde
- Start date
- Jul 21, 2013
- 53,029
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Why are you using potassium peroxymonosulfate aka "shock" product?
Potassium peroxymonosulfate is also called MPS.
www.troublefreepool.com
Eliminating Interference From Potassium Monopersulfate Compounds in Chlorine Testing
The Monopersulfate Interference Remover kit can be purchased as an upgrade to any of Taylor's DPD-based chlorine tests in two sizes: K‑2041 (.75 oz) and K‑2042 (2 oz). It’s also available as a stand-alone kit, the K‑1518 FAS-DPD chlorine/monopersulfate test.
Potassium peroxymonosulfate is also called MPS.
MPS
A non chlorine oxidizer or ‘shock’. It is acidic and will cause lower pH and … Read more…
www.troublefreepool.com
Eliminating Interference From Potassium Monopersulfate Compounds in Chlorine Testing
The Monopersulfate Interference Remover kit can be purchased as an upgrade to any of Taylor's DPD-based chlorine tests in two sizes: K‑2041 (.75 oz) and K‑2042 (2 oz). It’s also available as a stand-alone kit, the K‑1518 FAS-DPD chlorine/monopersulfate test.
Last edited:
Similar threads
