Hi I have an Intex sand pump WITH TIMER model SF60110-2 IT PUMPS 3000GPH MY POWER BUTTON IS BROKEN AND BROKEN MEANING SNAPPED OFF AND ON ITS SIDE I TOOK IT APART TO TRY & FIX IT TO NO AVAIL it's BEYOND HELP TRIED TO BUY ONE FROM INTEX BUT THEY WERE NO HELP AT ALL SAID I WOULD HAVE TO REPLACE THE MOTOR JUST TO HAVE A WORKING POWER SWITCH IS THERE ANY WAY TO HARDWIRE IT, IT HAS 3 WIRES YELLOW BLACK &WHITE I FORGOT HOW THEY WENT AND WHERE CAN I BUY A NEW SWITCH AND WHAT KIND PLEASE HELP
BROKEN POWER SWITCH
- Thread starter TINA SCHWARTZMANN
- Start date
- Jun 22, 2014
- 47,798
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Hello Tina and welcome to TFP! 
Sorry to hear about your Intex switch problem. Some of those products don't leave much room for DIY repairs like a standalone motor might. If you haven't already replaced it, you might post a close-up pic or two of the switch and what you have open. Maybe someone here will be able to help. Thanks for posting and good luck.
Sorry to hear about your Intex switch problem. Some of those products don't leave much room for DIY repairs like a standalone motor might. If you haven't already replaced it, you might post a close-up pic or two of the switch and what you have open. Maybe someone here will be able to help. Thanks for posting and good luck.
